| Modbus Ethernet / Serial Communication Modules for ControlLogix |
Part Numbers: SST-ESR2-CLX-RLL, SST-SR4-CLX-RLL
 |
| |
 Overview & Features:
- Rockwell Encompass™ Product Partner
- 2 modules versions:
- 4 Serial channels
- 1 Ethernet and 2 Serial channels
- Manage up to 4 Serial ports on single module
- Manage Ethernet and Serial communication on single module
- Remote configuration through RSLinx and TCP
- Direct I/O Access (no ladder logic) , 32K words/32K bits internal memory
- Isolation between each Serial port, Automatic selection of Serial electrical interface (RS232/RS485)
|
| Profibus Communication Modules for ControlLogix |
Part Numbers: SST-PB3-CLX-RLL, SST-PB3-CLX-DTM
Overview & Features:
- Rockwell Encompass™ Product Partne. Open Rockwell ControlLogix PLC to PROFIBUS network
- 2 modules versions:
- PROFIBUS
- PROFIBUS + CommDTM
- Profibus
- Master DP-V0 and DP-V1, Class-1 & Class-2
- Slave DP-V0
- Support Master and Slave modes simultaneously
- All speeds up to 12 Mb/s (including speed 31.25 / 45.45 Kbits) Up to 125 DP slaves (Extremely fast network update times)
|
 |
Profibus Communication Modules for SLC
|
Part Number: SST-PB3-SLC
Overview & Features:
- Profibus
- Master DP-V0 Class-1 & Class-2
- Master DP-V1 Class-1 & Class-2
- Slave DP-V0 (up to 122 words of input data and 122 words of output data as slave)
- Support Master and Slave modes simultaneously
- I/O Process Data Mapping
- I and O files: 32 words Input + 32 words Output
- M1 and M0 files: 1000 words Input / output (128 words in/out if configuring with COM PROFIBUS)
- All speeds up to 12 Mb/s (including speed 31.25 / 45.45 Kbits). Up to 125 DP slaves (Extremely fast network update times)
|
 |
ASI Scanner Modules for SLC 5/03 or Higher Controller
|
Part Number: SST-ASI-SLC
Overview & Features:
- AS-i conformance tested. Compliance with AS-Interface specification 3.0
- Supports 2 independent AS-I networks with up to 124 AS-i slave devices
- Fast, easy setup into SLC backplane
- AS-i I/O data mapped into the SLC processor’s I, O files. Multiple SST-ASI-SLC modules can be used in one SLC rack
- Configures scanner with RSLogix™ 500
3rd Generation Profibus Interface Cards for GE Fanuc Rx7i & 90-70
|
Part Number: SST-PB3-VME-1(E) , SST-PB3-VME-2 (E)
Overview & Features:
- Simultaneous execution of Profibus DP Master, DP Slave and FDL (layer 2)
- Manages PROFIBUS DP-V0, V1 services
- Supports all standard Profibus baud rates: 9.6 Kbaud to 12 Mbaud
- Supports 16-bit transfers (VME D16) with both VME A24 (standard) and A16 (short I/O) address transfers
- Two versions of network interface cards provide the option of connecting to one or two independent Profibus networks
- Diagnostic LEDs for system status, watchdog timeout, and communications status
DeviceNet Slave Adapter For Siemens ET200S Expansion Modules
|
Overview & Features:
- Supports all Siemens ET200S expansion modules
- Up to 63 expansion modules supported per SST adapter
- Supports expansion module parameterization
- Supports expansion module diagnostics
- 3 LEDs provide diagnostic information on module, network and I/O status
- Module "hot swap" supported
- Allows replacement of expansion modules while device is active on network without removing power
|
